Issues »  Volume 39, Issue 9

Metallurgy of the Grey Cast Iron for the Automotive Parts

Jiří Machuta, Iva Nová

Technical University of Liberec, Studentská 1402/2, 46117 Liberec 1, Czech Republic

Received: 15.01.2017. Download: PDF

The melt metal is a complex solution, which may contain for the production of high-quality grey iron a number of unsuitable elements. The molten cast iron contains areas enriched with carbon, higher amount of silicon in local areas, manganese, sulphur, and phosphorus. These elements can adversely affect the properties of the produced iron for the automotive industry. The oxygen activity, hardness, tensile strength, viscosity, chemical composition, and other physical and mechanical properties of cast iron are studied.

Key words: cast iron, carbon, hardness, oxygen activity, metallurgy, melting devices, brake disc.

URL: http://mfint.imp.kiev.ua/en/abstract/v39/i09/1267.html

DOI: https://doi.org/10.15407/mfint.39.09.1267

PACS: 61.72.Qq, 61.72.sd, 62.20.Qp, 64.70.dg, 81.05.Bx, 81.30.Fb, 81.40.-z

Citation: Jiří Machuta and Iva Nová, Metallurgy of the Grey Cast Iron for the Automotive Parts, Metallofiz. Noveishie Tekhnol., 39, No. 9: 1267—1279 (2017)

REFERENCES
  1. B. M. Turovskiy and A. P. Lyubimov, Izvestiya Vysshikh Uchebnykh Zavedeniy. Chernaya Metallurgiya, No. 1: 24 (1960) (in Russian).
  2. B. M. Turovskiy and A. P. Lyubimov, Izvestiya Vysshikh Uchebnykh Zavedeniy. Chernaya Metallurgiya, No. 2: 12 (1965) (in Russian).
  3. Z. Bůžek, Hutnické Actuality, 20, Nos. 1–2: 3 (1979) (in Czech).
  4. K. Kochesian, Gisserei Forschung, No. 1: 3 (1972) (in German).
  5. T. Benecke, T. Tuan, G. Kahr, W. Schubert, and B. Lux, Slévárenství, 74, Nos. 10–11: 5 (1987) (in Czech).
  6. Z. Bůžek, Základní Termodynamické Výpočty, Hutnické Aktuality, Informetal, 29, VÚHŽ (1988) (in Czech).
  7. L. Konečný, J. Exner, and I. Nová, Aktivita Kyslíku u Grafitických Litin (Final Report of the Grant Project GAČR 106/95/171) (Technical University of Liberec: 1998) (in Czech).
  8. F. Mampey, D. Habets, and F. Seatens, Giessereiforschung, 60, No. 1: 2 (2008) (in German).
  9. I. Nová and P. Kosek, Slévárenství, LVI, Nos. 11/12: 492 (2008) (in Czech).
  10. T. Elbel and J. Hampl, Metalurgija (Hrvatsko Metalurško Društvo), 48, No. 4: 243 (2009).
  11. Z. Andršová and B. Skrbek, Manufacturing Technology, 12, No. 13: 93 (2012).
  12. A. Vaško, Manufacturing Technology, 13, No. 1: 115 (2013).
  13. I. Nová and J. Machuta, Metallofiz. Noveishie Tekhnol., 37, No. 2, 209 (2015). Crossref
  14. I. Nová and J. Machuta, Metallofiz. Noveishie Tekhnol., 36, No. 2, 175 (2014). Crossref

© 2013–2017 "G.V. Kurdyumov Institute for Metal Physics"