On the Influence of Facing on Strength of Solids with Surface Defects

I. P. Shatskyi$^{1}$, V. V. Perepichka$^{1}$, L. Ya. Ropyak$^{2}$

$^{1}$Ivano-Frankivsk Department of the Pidstryhach Institute for Applied Problems of Mechanics and Mathematics NAS of Ukraine, 3 Mykytynets'ka Str., UA-76002 Ivano-Frankivsk, Ukraine
$^{2}$Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska Str., UA-76019 Ivano-Frankivsk, Ukraine

Received: 02.03.2019. Download: PDF

The engineering method of calculating the retention capacity of solids with superficial crack-like defects recovered by surfacing non-contrast layer is developed. In the analytical form, quantitative dependences of the surfacing efficiency on the thickness of the renovation layer, on the depth of feeling of the crack and on crack growth resistance of the using material are determined.

Key words: superficial crack, surfacing, limiting equilibrium.

URL: http://mfint.imp.kiev.ua/en/abstract/v42/i01/0069.html

DOI: https://doi.org/10.15407/mfint.42.01.0069

PACS: 62.20.F-, 62.20.mt, 81.20.Vj, 81.40.Jj, 81.70.Bt

Citation: I. P. Shatskyi, V. V. Perepichka, and L. Ya. Ropyak, On the Influence of Facing on Strength of Solids with Surface Defects, Metallofiz. Noveishie Tekhnol., 42, No. 1: 69—76 (2020) (in Ukrainian)

  1. A. Hasui and O. Morigaki, Naplavka i Napylenie [Surfacing and Spraying] (Moscow: Mashinostroenie: 1985) (in Russian).
  2. A. M. Sidorov, Vosstanovleniye Detaley Mashin Napyleniem i Naplavkoy [Restoration of Machine Parts by Spraying and Surfacing] (Moscow: Mashinostroyeniye: 1987) (in Russian).
  3. P. A. Topolyanskiy and A. P. Topolyanskiy, Armaturostroenie, 73, No. 4: 79 (2011) (in Russian).
  4. V. V. Panasyuk, V. I. Marukha, and V. P. Sylovanyuk, Injection Technologies for the Repair of Damaged Concrete Structures (New York, USA: Springer: 2014). Crossref
  5. I. Shatskyi and I. Kurtash, Procedia Structural Integrity, 13: 1482 (2018). Crossref
  6. I. P. Shats'kyi, Mater. Sci., 51, Iss. 3: 322 (2015). Crossref
  7. M. Isida, J. Appl. Mech., 33, No. 3: 674 (1966). Crossref
  8. M. P. Savruk and A. P. Datsyshin, Soviet Appl. Mech., 10, Iss. 7: 755 (1974). Crossref
  9. M. P. Savruk, Dvumernye Zadachi Uprugosti Dlya Tel s Treshchinami [Ttwodimensional Problems of Elasticity for Cracked Bodyes] (Kiev: Naukova Dumka: 1981) (in Russian).
  10. M. P. Savruk, Koeffitsienty Intensivnosti Napryazheniy v Telakh s Treshchinami [Stress Intensity Factors in Cracked Bodies] (Kiev: Naukova Dumka: 1988), vol. 2 (in Russian).
  11. C. Atkinson, Int. J. Eng. Sci., 13, Iss. 5: 489 (1975). Crossref
  12. C. Atkinson and H. Javaherian, J. Inst. Math. Appl., 26, Iss. 3: 235 (1980). Crossref
  13. I. P. Shatskii, Soviet Mater. Sci., 25, Iss. 2: 160 (1989). Crossref
  14. M. J. Young and C. T. Sun, Int. J. Fracture, 55, Iss. 1: 81 (1992). Crossref
  15. I. P. Shatskii, J. Math. Sci., 103, Iss. 3: 357 (2001). Crossref
  16. A. M. Khludnev and V. A. Kovtunenko, Analysis of Cracks in Solids (Southampton-Boston: WIT Press: 2000).
  17. P. Shats'kyi and V. V. Perepichka, Soviet Mater. Sci., 28, Iss. 2: 154 (1993). Crossref
  18. V. V. Perepichka, J. Math. Sci., 90, Iss. 2: 1978 (1998). Crossref
  19. V. V. Perepichka and I. P. Shats'kyi, J. Math. Sci., 109, Iss. 1: 1290 (2002). Crossref
  20. I. P. Shats'kyi and V. V. Perepichka, Mater. Sci., 40, Iss. 2: 240 (2004). Crossref