Forecast and Control of Structure and Properties of Ultra-Low-Carbon Steels

Issues » Volume 43, Issue 6

Yu. M. Koval$^{1}$, V. Z. Kutsova$^{2}$, T. V. Kotova$^{2}$, M. A. Kovzel$^{2}$

$^{1}$G. V. Kurdyumov Institute for Metal Physics, NAS of Ukraine, 36 Academician Vernadsky Blvd., UA-03142 Kyiv, Ukraine
$^{2}$National Metallurgical Academy of Ukraine, 4 Gagarin Ave., UA-49600 Dnipro, Ukraine

Received: 03.03.2021. Download: PDF

Concentration ranges of elements’ containing to optimize the composition of 01YuTA, 01YuT steels and to ensure the required set of rolled products properties are obtained using the method of physico-chemical modelling. The effect of rolling deformation modes in the ferritic temperature range on the formation of the structure and on the properties of ultra-low-carbon steel is investigated. The obtained data can be used to control the processes of structure formation and to establish rational technological regimes for the processing of rolled sheet material for automobile and machine-building enterprises.

Key words: structure of ultra-low-carbon steels, hot rolling, deep drawing, physico-chemical modelling, mechanical properties.

URL: https://mfint.imp.kiev.ua/en/abstract/v43/i06/0753.html

DOI: https://doi.org/10.15407/mfint.43.06.0753

PACS: 61.72.Mm, 81.40.Ef, 81.40.Lm, 81.40.Vw, 81.70.Bt

Citation: Yu. M. Koval, V. Z. Kutsova, T. V. Kotova, and M. A. Kovzel, Forecast and Control of Structure and Properties of Ultra-Low-Carbon Steels, Metallofiz. Noveishie Tekhnol., 43, No. 6: 753—768 (2021)

REFERENCES

Andrea Pedroza da Rocha Santos, Thaís Conde da Mota, Heber Vieira Gomes Segundo, Luiz Henrique de Almeida, Leonardo Sales Araújo, and Adriana da Cunha Rocha, J. Mater. Res. Technol., 7, Iss. 3: 331 (2018). Crossref
Yu. V. Lipukhin, V. I. Slavov, and V. V. Kuznetsov, Stal', No. 3: 63 (1993) (in Russian).
Jean-Pierre Birat, Metall. Res. Technol., 113, No. 2: 201 (2016). Crossref
S. H. Hryshchenko, V. Z. Kutsova, V. Yu. Kamkin, S. H. Knapynskyi, S. V. Proidak, and A. O. Varitsev, Teoriya i Praktyka Metalurgii, No. 3: 5 (2019) (in Ukrainian).
Khu Min, Ma Fan, and Sonh Mantan, Metallurgicheskaya i Gornorudnaya Promyshlennost, No. 5 (290): 5 (2014) (in Russian).
D. Yu. Kuznetsov, Sb. Nauchn. Trudov DonHTU, Iss. 41: 129 (2013) (in Russian).
E. V Prikhodko, Effektivnost Kompleksnogo Legirovaniya Staley i Splavov [Complex Alloying Efficiency of Steels and Alloys] (Kiev: Naukova Dumka: 1995) (in Russian).
H. D. Sukhomlin, R. E Shchudro, and A. E. Shchudro, Metaloznavstvo ta Termichna Obrobka Metaliv, No. 2: 30 (2015) (in Ukrainian).
Yu. D. Stohnii, A. P. Stovpchenko, Yu. S. Proidak, and L. V. Kamkina, Systemni Tekhnologiyi, No. 3: 156 (2010) (in Russian). Crossref
L. V. Kamkina, Yu. S. Proidak, V. Yu. Kamkin, O. A. Remez, and O. H. Bezshkurenko, Teoriya i Praktyka Metalurgiyi, Iss. 1-2: 35 (2018) (in Ukrainian).
E. V. Prikhodko Metallokhimiya Mnogokomponentnykh Sistem [Metal Chemistry of the Multicomponent Systems] (Moscow: Metallurgiya: 1995) (in Russian).
Yu. S. Proidak, V. Z. Kutsova, M. A. Kovzel, T. V. Kotova, and H. P. Stetsenko, Tonkolystova Stal: Monohrafiya [Sheet Steel] (Dnipro: NMetAU: 2018) (in Ukrainian).
O. N. Yakubovskii, Proizvodstvo Prokata, No. 6: 26 (1999) (in Russian).
I. V. Frantseniuk, Sovremennoe Metallurgicheskoe Proizvodstvo [Modern Metallurgical Production] (Moscow: Metallurgia: 1995) (in Russian).
H. V. Levchenko, S. A. Vorobei, and A. V. Yankovskii, Teoriya i Praktika Metallurgii, No. 2: 49 (2004) (in Russian).
M. Dehner, T. Kheller, and Yu. F. Tarasevich, Metallurg, No. 4: 37 (2000) (in Russian).
Yu. S. Projdak, V. Z. Kutsova, T. V. Kotova, H. P. Stetsenko, and V. V. Prutchykova, Usp. Fiz. Met., 20, No. 2: 213 (2019). Crossref
H. I. Belchenko and S. I. Hubenko, Osnovy Metallografii i Plasticheskoy Deformatsii Stali [Fundamentals of Metallography and Plastic Deformation of Steel] (Kiev, Donetsk: Vishcha Shkola: 1987) (in Russian).
S. I. Hubenko Deformatsiya Metallicheskikh Materialov [Deformation of Metallic Materials] (Dnipropetrovsk: Art-press: 2006) (in Russian).
A. N. Zavalishchin, H. A. Zavalishchin, L. V. Krynina, and A. A. Plaksina, Fazovye i Strukturnye Prevrashcheniya v Stalyakh, Iss. 3: 418 (2002) (in Russian).
K. Khulka and F. Khaisterkamp, Stal, No. 9: 24 (1990) (in Russian).
V. Dedek, Polosovaya Stal' dlya Glubokoy Vytyazhki [Deep Drawn Strip Steel] (Moscow: Metallurgiya: 1970) (in Russian).
Ya. Yekh, Termicheskaya Obrabotka Stali [Heat Treatment of Steel] (Moscow: Metallurgiya: 1979) (in Russian).
S. S Huseva, V. D. Hurenko, and Yu. D. Zvarkovskii, Nepreryvnaya Termicheskaya Obrabotka Avtolistovoy Stali [Continuous Heat Treatment of Auto Sheet Steel] (Moscow: Metallurgiya: 1979) (in Russian).
Yu. Ya. Meshkov, S. A. Kotrechko, and H. P. Zimina, Stroitelstvo, Materialovedenie, Mashinostroenie, Iss. 45: 12 (2008) (in Russian).
M. A. Beniakovskii, V. L. Mazur, and V. I. Meleshko, Proizvodstvo Avtomobilnogo Lista [Autobody Sheet Production] (Moscow: Metallurgiya: 1979) (in Russian).