Specifics of Creating Joints from Modern Boron-Microalloyed High-Strength Steels Utilizing Laser, Contact Spot, as Well as Argon-Arc Spot Welding Technologies

G. Polishko, Yu. Kostetskyi, V. Kostin, Ye. Pedchenko, A. Bernatskyi, M. Sokolovskyi, P. Honcharov, and V. Zaitsev

Институт электросварки им. Е. О. Патона НАН Украины, ул. Казимира Малевича, 11, 03150 Киев, Украина

Получена: 09.01.2024; окончательный вариант - 11.04.2024. Скачать: PDF

In this study, an analysis of current welding technologies for new high-strength low-alloyed AHSS sheet steels is presented. Over the course of it, a series of welded joints of sheet metal with a thickness of 1.2 mm made of CR1000Y1370T-CH steel (composition: 0.23% C, 2% Si, 3% Mn, 0.015–2% Al, 1% Cr + Mo, 0.15% Ti + Nb, 0.2% Cu) by Voelstalpine (Austria) is investigated. The joints are produced using laser, spot, and argon-arc spot welding under specified conditions. High-quality weld joints are obtained through laser welding with the formation of a dispersed ferrite–bainite structure with an acceptable hardness level (up to 4000 MPa) without martensitic-type structures and zinc evaporation from the sheet coating along the entire length of the welded joint. As discovered, due to delamination and remnants of zinc coating, it is not possible to achieve a high quality of weld joints while using spot welding, as well as argon-arc spot welding. The selected welding conditions for these technologies are found to be ineffective and require further refinement.

Ключевые слова: AHSS steel, laser welding, argon-arc spot welding, spot welding, microstructure, ferrite, bainite, martensite.

URL: https://mfint.imp.kiev.ua/ru/abstract/v46/i09/0893.html

PACS: 06.60.Vz, 42.62.Cf, 61.72.Ff, 81.05.Bx, 81.20.Vj, 81.30.Kf, 81.70.Bt


ЦИТИРОВАННАЯ ЛИТЕРАТУРА
  1. J. Galán, L. Samek, P. Verleysen, K. Verbeken, and Y. Houbaert, Revista De Metalurgia, 48, No. 2: 118 (2012).
  2. G. Park, S. Jeong, and C. Lee, Metals Mater. Int., 27: 2046 (2021).
  3. F. Bayock, P. Kah, A. Salminen, M. Belinga, and X. Yang, Rev. Adv. Mater. Sci., 59, No. 1: 54 (2020).
  4. F. Bayock, P. Kah, B. Mvola, and P. Layus, Rev. Adv. Mater. Sci., 58, No. 1: 38 (2019).
  5. J. Hall and J. Fekete, Automotive Steels (Eds. Radhakanta Rana and Shiv Brat Singh) (Elsevier: 2017), p. 19.
  6. T. Hilditch, S. Toman, and D. Fabijanic, Materials Forum, 31: 24 (2007).
  7. M. Singh, Int. J. Emerging Technol. Adv. Eng., 6, No. 7: 246 (2016).
  8. D. Michell, A. Centeno, and H. Goldenstein, Mater. Sci. Forum, 941: 413 (2018).
  9. M. N. M. Salleh, M. Ishak, and M. M. Quazi, Technological Advancement in Mechanical and Automotive Engineering (Eds. M. Y. Ismail, M. S. M. Sani, S. Kumarasamy, M. A. Hamidi, and M. S. Shaari) (Singapore: Springer: 2023), p. 279.
  10. S. Cecchel, SAE Int. J. Mater. Manufact., 14, No. 1: 81 (2021).
  11. M. Shome and M. Tumuluru, Welding and Joining of Advanced High Strength Steels (AHSS) (Eds. M. Shome and M. Tumuluru) (Elsevier: 2015), p. 204.
  12. D.-Y. Choi and Y.-G. Kim, J. KWJS, 27, No. 2: 125 (2009).
  13. M. I. Khan, Spot Welding of Advanced High Strength Steels (Waterloo: 2007).
  14. M. Tümer, C. Schneider-Brökamp, and N. Enzinger, J. Manufact. Processes, 82: 203 (2022).
  15. A. Guzanová, D. Draganovská, M. Tomáš, E. Janoško, and R. Moro, Acta Mechanica Slovaca, 24, No. 4: 24 (2020).
  16. Y. S. Kim, Y. S. Kim, K. C. Park, J. B. Nam, T. J. Kim, and B. H. Lee, J. Korean Society for Technology of Plastics, 26, No. 4: 246 (2017).
  17. A. Bernatskyi and V. Khaskin, History of Science and Technology, 11, No. 1: 125 (2021).
  18. A. Bernatskyi, O. M. Berdnikova, V. Sydorets, V. Kostin, and O. Kushnarova, Solid State Phenomena, 313: 106 (2021).
  19. V. Khaskin, A. Bernatskyi, O. Siora, and O. Nikulin, Metallofiz. Noveishie Tekhnol., 33: 561 (2011).
  20. X. Hu and Z. Feng, Advanced High-Strength Steels-Basic and Application in the Automotive Industry (Oak Ridge: Oak Ridge National Laboratory: 2021).
  21. K. A. Manoharan, M. M. Quazi, M. N. Bashir, M. N. M. Salleh, A. Q. Zafiuddin, and R. Linggamm, Int. J. Technol. Eng. Studies, 6, No. 1: 23 (2020).
  22. D. Lesyk, S. Martinez, B. Mordyuk, V. Dzhemelinskyi, and O. Danyleiko, Advances in Design, Simulation and Manufacturing II (Eds. V. Ivanov, J. Trojanowska, J. Machado, O. Liaposhchenko, J. Zajac, I. Pavlenko, M. Edl, and D. Perakovic) (Springer: 2019), p. 188.
  23. V. Pozniakov, L. Markashova, O. Berdnikova, T. Alekseienko, and S. Zhdanov, Materials Science Forum, 927: 29 (2018).
  24. D. Kritskiy, O. Pohudina, M. Kovalevskyi, Ye. Tsegelnyk, and V. Kombarov, Integrated Computer Technologies in Mechanical Engineering — 2021 (Eds. M. Nechyporuk, V. Pavlikov, and D. Kritskiy) (Springer: 2021), p. 924.
  25. A. Bernatskyi, V. Sydorets, O. Berdnikova, I. Krivtsun, and O. Kushnarova, Solid State Phenomena, 313: 94 (2021).
  26. O. Strelko, O. Solovyova, Yu. Berdnychenko, H. Kyrychenko, and L. Solovyova, Acta Scientiarum Polonorum Administratio Locorum, 22, No. 2: 263 (2023).
  27. I. Bondarenko, A. Severino, I. Olayode, T. Campisi, and L. Neduzha, Infrastructures, 7, No. 9: 124 (2022).
  28. H. Kyrychenko, O. Strelko, and Yu. Berdnychenko, IOP Conf. Series: Earth and Environmental Sci., 666, No. 4: 042054 (2021).
  29. O. Fomin, A. Lovska, and A. Horban, History of Science and Technology, 11, No. 2: 351 (2021).
  30. O. Fesovets, O. Strelko, Yu. Berdnychenko, S. Isaienko, and O. Pylypchuk, Proc. 23rd Int. Sci. Conf. ‘Transport Means 2019’ (October 02-04, 2019) (Palanga: 2019), part 1, p. 381.
  31. A. Bernatskyi, O. Siora, M. Sokolovskyi, V. Lukashenko, T. Nabok, N. Shamsutdinova, and V. Bondarieva, Proc. 26th Int. Sci. Conf. ‘Transport Means 2022’ (5–7 October, 2022) (Palanga: 2022), part 1, p. 89.
  32. O. Aksonov, Ye. Tsegelnyk, V. Kombarov, S. Plankovskyy, and Y. Aksonov, Proc. Int. Conf. ‘Smart Technologies in Urban Engineering–STUE-2022’ (June 9–11, 2022) (Kharkiv: 2022), p. 547.
  33. P. Gontarovskyi, N. Smetankina, N. Garmash, and I. Melezhyk, Integrated Computer Technologies in Mechanical Engineering — 2020 (Eds. P. Gontarovskyi, N. Smetankina, N. Garmash, and I. Melezhyk) (Springer: 2020), p. 609.
  34. Y. Milman, B. Mordyuk, K. Grinkevych, S. Chugunova, I. Goncharova, A. Lukyanov, and D. Lesyk, Progress in Physics of Metals, 21: 554 (2020).